1.
Locate the Data Link Connector (DLC) underneath the driver's side dashboard.
Use the figure as a map for your DL (
They are not lettered on your vehicle.)
The view is looking straight into the cavities of the DLC.
2.
Connect cavity G with cavity A using a fused jumper wire.
Your vehicle will respond by locking and unlocking
the door locks within 2 seconds.
3.
Press any button 3 times in successtion on first remote to be programmed.
Locks will lock and unlock verifying remote
was programmed.
4.
Press any button 3 times in succession on second remote to be programmed if applicable.
Locks will lock and unlock to verify remote
was programmed.
5. Remove
jumper wire and test remote(s)