. Close all doors.
2. Press and hold the Unlock button on door lock switch on drivers door.
Hold until instructed
to release.
3. Insert and remove key from ignition 2 times. Do Not turn ignition.
4. Insert key in ignition a third time and leave key in ignition. Do Not turn ignition.
5.
Release door lock switch on drivers door panel.
A Chime will sound 3 times indicating that you
are in programming mode.
6. Press both the Lock and Unlock buttons on the remote up to 30 seconds.
A chime will sound
2 times if remote has programmed successful.
7. Repeat step 6 if you are programming additional remotes.
8. Remove key from ignition to exit programming mode.